ATV660C40T4X1

Ürün açıklaması

Teknik bilgiler

Genel

Ürün kodu

ATV660C40T4X1

Marka

Schneider Electric

Ürün grubu

Schneider Electric › Frekans İnvertörleri › Altivar 660 › Frekans İnvertörü

Durum

Yeni

Stok durumu

Sorunuz

Teknik özellikler

Range of product

Altivar Process ATV600

Product specific application

Process and utilities

Product or component type

Variable speed drive

Device short name

ATV660

Product destination

Asynchronous motors Synchronous motors

Provided equipment

Enclosure PanelSeT SFN Graphical operating panel in the enclosure door Frequency inverter Main switch Line choke Terminal block main supply Terminal block motor

Colour of enclosure

Light grey (RAL 7035)

IP degree of protection

IP23 conforming to IEC 61800-5-1

Communication port protocol

EtherNet/IP Modbus TCP Modbus serial

Type of cooling

Forced convection

Supply frequency

50/60 Hz +/-5 %

[Us] rated supply voltage

480 V +/- 10 %

Network number of phases

3 phases

Output voltage

<= power supply voltage

Permissible temporary current boost

1.1 x In during 60 s (normal duty) 1.5 x In during 60 s (heavy duty)

Speed drive output frequency

0.1…500 Hz

Continuous output current

730 A at 2.5 kHz for normal duty 590 A at 2.5 kHz for heavy duty

Energy efficiency ratio

0.98

Power dissipation in W

9900 W, total (normal duty) 7370 W, total (heavy duty) 1120 W, control part (normal duty) 770 W, control part (heavy duty)

Volume of cooling air

1740 m3/h for power 280 m3/h for control

Noise level

71 dB conforming to 86/188/EEC - physical agents (noise) directive

Motor power kW

450 kW for normal duty 355 kW for heavy duty

Prospective line Isc

50 kA for 100 ms

Motor recommanded cable cross section

3 x (3 x 120 mm²) (heavy duty) 3 x (3 x 185 mm²) (normal duty) 4 x (3 x 120 mm²) (normal duty) 4 x (3 x 95 mm²) (heavy duty)

Option card

Slot A: communication module, Profibus DP V1 Slot A: communication module, PROFINET Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45 Slot A: communication module, CANopen SUB-D 9 Slot A: communication...

Safety function

STO (safe torque off), level SIL 3 for <= 100 ms

EMC filter

Integrated conforming to IEC 61800-3, category C3, shielded cable with 150 m Integrated conforming to IEC 61800-3, category C4, unshielded cable with 250 m

Discrete input number

8

Protection type

Motor: thermal protection Motor: safe torque off Motor: motor phase break Drive: thermal protection Drive: safe torque off Drive: overheating Drive: overcurrent (between output phases and earth) Drive: overload (output) Drive: short-circuit protection Drive: motor phase break Drive: overvoltage (DC...

Discrete input type

DI1...DI6 programmable, 24 V DC ( DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC ( STOA, STOB safe torque off, 24 V DC ( 2.2 kOhm

Frequency resolution

Display unit: 0.1 Hz Analog input: 0.012/50 Hz

Connector type

RJ45 (on the control block) for Modbus serial RJ45 (on the control block) for Ethernet IP/Modbus TCP

Discrete input logic

16 preset speeds

Physical interface

2-wire RS 485 for Modbus serial

Transmission frame

RTU for Modbus serial

Transmission rate

10/100 Mbit/s for Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial

Exchange mode

Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Data format

8 bits, configurable odd, even or no parity for Modbus serial

Type of polarization

No impedance for Modbus serial

Analogue input number

3