ATV930C22N4C

Ürün açıklaması

Teknik bilgiler

Genel

Ürün kodu

ATV930C22N4C

Marka

Schneider Electric

Ürün grubu

Schneider Electric › Frekans İnvertörleri › Altivar 930 › Frekans İnvertörü

Durum

Yeni

Stok durumu

Sorunuz

Teknik özellikler

Range of Product

Altivar Process ATV900

Product Specific Application

Process for industrial

Product or Component Type

Variable speed drive

Variant

Standard version Without braking chopper

Device Application

Industrial Application

Product destination

Synchronous motors Asynchronous motors

Phase

3 phase

Mounting Mode

Wall mount

Continuous output current

302 A 2.5 kHz heavy duty 427 A 2.5 kHz normal duty

Communication Port Protocol

Modbus serial EtherNet/IP Modbus TCP

option module

Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw termin...

[Us] rated supply voltage

380...480 V - 15...10 %

Relative symmetric mains voltage tolerance

10 %

Relative symmetric network frequency tolerance

5 %

nominal output current

427.0 A

Motor power kW

220.0 kW normal duty 160.0 kW heavy duty

EMC filter

Integrated With EMC plate option

IP degree of protection

IP21

Degree of protection

UL type 1

Electrical connection

Control screw terminal 0.5...1.5 mm² 20 AWG...16 AWG Line side screw terminal 2 x 150 mm² 2 x 350 kcmil Motor screw terminal 2 x 150 mm² 2 x 350 kcmil DC bus screw terminal 2 x 150 mm² 2 x 350 kcmil

Transmission Rate

10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Exchange mode

Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Data format

8 bits, configurable odd, even or no parity Modbus serial

Type of polarization

No impedance Modbus serial

Number of addresses

1…247 Modbus serial

Supply

External supply for digital inputs 24 V DC 19…30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21…27 V), <200 mA overload and short-circuit protection

Local signalling

Local diagnostic: 3 LED (mono/dual colour) Presence of voltage: 1 LED (red) Embedded communication status: 3 LED (dual colour) Communication module status: 4 LED (dual colour)

Input compatibility

DI1...DI8 discrete input level 1 PLC IEC 61131-2 DI7, DI8 pulse input level 1 PLC IEC 65A-68 STOA, STOB discrete input level 1 PLC IEC 61131-2

Discrete input logic

Positive logic (source) DI1...DI8), 11 V Negative logic (sink) DI1...DI8), > 16 V, Positive logic (source) DI7, DI8), 2.5 V Positive logic (source) STOA, STOB), 11 V

Sampling duration

2 ms +/- 0.5 ms DI1...DI8) - discrete input 5 ms +/- 1 ms DI7, DI8) - pulse input 1 ms +/- 1 ms AI1, AI2, AI3) - analog input 5 ms +/- 1 ms AQ1, AQ2) - analog output

Accuracy

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Linearity error

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AQ1, AQ2 +/- 0.2 % analog output

Refresh time

Relay output R1, R2, R3)5 ms +/- 0.5 ms)

Isolation

Between power and control terminals

Discrete input number

10

Discrete input type

DI1...DI8 programmable, 24 V DC DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC STOA, STOB safe torque off, 24 V DC 2.2 kOhm

Discrete output number

2

Discrete output type

Logic output DQ+ 0…1 kHz Programmable as pulse output DQ+ 0…30 kHz Logic output DQ- 0…1 kHz <= 30 V DC 100 mA

Analogue input number

3

Analogue input type

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits