LXM05BD10M2

Ürün açıklaması

Teknik bilgiler

Genel

Ürün kodu

LXM05BD10M2

Marka

Schneider Electric

Ürün grubu

Schneider Electric › Servo Sürücüler › Lexium 05 › Servo Sürücü

Durum

Yeni

Stok durumu

Sorunuz

Teknik özellikler

Range of product

Lexium 05

Product or component type

Motion servo drive

Component name

LXM05B

Network number of phases

Single phase

power supply voltage

200...240 V - 15...10 %

Continuous output current

4 A at 4 kHz 3.2 A at 8 kHz

Nominal power

0.75 kW at 4 kHz

Discrete input number

2 safety discrete input(s) 4 logic discrete input(s)

Type of polarization

No polarization impedances for Modbus

power supply voltage limits

170…264 V

Supply frequency

50/60 Hz - 5...5 %

power supply frequency limits

47.5…63 Hz

transient RMS output current

6 A at 8 kHz for 3 s 7 A at 4 kHz for 3 s

Line current

6.7 A at 240 V 8.1 A at 200 V

maximum prospective line Isc

1 kA

Switching frequency

8 kHz 4 kHz

Overvoltage category

III

Inrush current

60 A

Maximum leakage current

30 mA

Output voltage

<= power supply voltage

Insulation

Electrical between power and control

recommended type of cable for mounting in an enclosure

Single-strand IEC cable (temperature: 45 °C) copper 70 °C PVC Single-strand IEC cable (temperature: 45 °C) copper 90 °C XLPE/EPR

Electrical connection

Terminal, clamping capacity: 2.5 mm², 14 AWG (PA/+, PBI, PBe) Terminal, clamping capacity: 2.5 mm², 14 AWG (R/L1, S/L2, T/L3)

Tightening torque

PA/+, PBI, PBe: 0.8 N.m R/L1, S/L2, T/L3: 0.8 N.m

Discrete input type

Logic (LI1, LI2, LI3, LI4 terminals) Safety (PWRR_A, PWRR_B terminals)

Sampling duration

ANA1+/ANA1-, ANA2+/ANA2-: 0.25 ms analog LI1, LI2, LI3, LI4: 0.25 ms discrete

Discrete input voltage

24 V DC for logic 24 V DC for safety

Discrete input logic

Negative (LI1, LI2, LI3, LI4) at State 0: > 19 V at State 1: Positive logic (compliment of PWRR_A, compliment of PWRR_B) at State 0: 15 V conforming to EN/IEC 61131-2 type 1 Positive logic (LI1, LI2, LI3, LI4) at State 0: 15 V conforming to EN/IEC 61131-2 type 1

Response time

<= 10 ms

Discrete output number

2

Discrete output type

Logic output(s) (LO1, LO2)24 V DC

Discrete output voltage

<= 30 V DC

Discrete output logic

Negative (LO1, LO2) conforming to EN/IEC 61131-2 Positive (LO1, LO2) conforming to EN/IEC 61131-2

Contact bounce time

1 ms for LI1...LI4

Braking current

50 mA

Response time on output

1 ms (LO1, LO2) for discrete output(s)

Absolute accuracy error

< +/- 2 % over operating temperature range

Linearity error

< +/- 0.5 %

Analogue input type

ANA1+/ANA1-, ANA2+/ANA2- analog input: differential +/- 10 V, impedance: >= 10000 Ohm, resolution: 14 bits

Protection type

Inputs signal: against reverse polarity Outputs signal: against short-circuits